Solid Ceramic Cheese Head Metric Machine Screws & Bolts

Located outside the USA? Call to place your order: +1 (603) 447-2090 • M-F, 8:00 am - 4:30 pm, EST

Solid Ceramic

Cheese Head Machine Screws & Bolts - Metric

stock ceramic cheese head fasteners - Metric metric cheese head solid ceramic bolts and machine screws are fully threaded. Our solid ceramic fasteners are manufactured under ISO 9001:2015 certification and ideally suited for aviation and aerospace’ critical and demanding applications and diverse environments.

Produced in Center Conway, NH. Immediate shipment from our fastener inventory.

Please visit our website for this important information:
Material Properties - Alumina (A998) & Zirconia (PSZ)
Strength - Alumina (A998)

No Free Samples

*Available sizes, compositions and lengths vary and may be dependent upon material properties and performance characteristics. Please check our website for the most up-to-date information.

Cheese head metric fastener dimensional reference

To order fasteners:find the correct size, then select the composition you require.

		A	B	C	D
Size	Composition	Head Diameter	Head Height	Slot Width	Slot Depth
M2 x 0.4	alumina	1.75 - 2.00	0.56 - 0.70	0.36 - 0.50	0.35 - 0.49
M2 x 0.4	zirconia	1.75 - 2.00	0.56 - 0.70	0.36 - 0.50	0.35 - 0.49
M3 x 0.5	alumina	5.20 - 5.50	1.86 - 2.00	0.86 - 1.00	0.90 - 1.30
M3 x 0.5	zirconia	5.20 - 5.50	1.86 - 2.00	0.86 - 1.00	0.90 - 1.30
M4 x 0.7	alumina	6.64 - 7.00	2.46 - 2.60	1.06 - 1.20	1.20 - 1.60
M4 x 0.7	zirconia	6.64 - 7.00	2.46 - 2.60	1.06 - 1.20	1.20 - 1.60
M5 x 0.8	alumina	8.14 - 8.5	3.12 - 3.30	1.26 - 1.51	1.5 - 2.0
M5 x 0.8	zirconia	8.14 - 8.5	3.12 - 3.30	1.26 - 1.51	1.5 - 2.0
M6 x 1.0	alumina	9-64 - 10.00	3.72 - 3.90	1.66 - 1.91	1.90 - 2.30
M6 x 1.0	zirconia	9-64 - 10.00	3.72 - 3.90	1.66 - 1.91	1.90 - 2.30
M8 x 1.25	alumina	12.57 - 13.00	4.82 - 5.00	2.06 - 2.31	2.30 - 2.80
M8 x 1.25	zirconia	12.57 - 13.00	4.82 - 5.00	2.06 - 2.31	2.30 - 2.80

Important Information -Please Read

Alumina & zirconia (PSZ) fasteners

The pitch diameter of male threads will not exceed the max allowable according to Class 2. Minimum allowable pitch diameter may be below that of Class 2, conversely for female threads. Due to shrink factor variances, the stack up tolerance cannot be controlled on the pitch. It is recommended that you not engage more than 5 to 10 threads on any male fastener.
No warranty with respect to torque strength and tensile strength is extended or implied. Ceramic materials are inherently brittle and display catastrophic failure if impacted or stressed beyond material limits.

Heat Resistant Corrosion Resistant Non-conductive Non Out-Gassing

Stock ceramic fasteners from Ceramco, Inc. Specializing in custom ceramic parts of complex geometries. Learn More.

Immediate Assistanceis only a phone call away. If you have any questions or require additional information, please call Ceramco at: +1 (603) 447-2090, Monday - Friday, 8:00 am - 4:30 pm, U.S. Eastern.