Located outside the USA? Call to place your order: +1 (603) 447-2090 • M-F, 8:00 am - 4:30 pm, EST

Solid Ceramic

Hex Nut - Metric  | → U.S. Inch

stock ceramic hex nut - MetricMetric ceramic hex nuts Our solid ceramic fasteners are ISO 9001-2015 quality system manufactured and ideally suited for fuel cell stack assemblies. Impermeable and unaffected by temperatures up to 2200° C.

Produced in New Hampshire, USA. Fasteners from inventory ship immediately, weekdays.

No Free Samples

*Available sizes, compositions and lengths vary and may be dependent upon material properties and performance characteristics. Please check our website for the most up-to-date information.

Metric hex nut dimensional reference

To order fasteners:find the correct size, then select the composition you require.

    B C
Size Com­posi­tion Flat-to-Flat Point-to-Point Height
M2 x 0.4 alumina 3.82 - 4.00 4.32 - 4.62 1.35 - 1.60
zirconia
M3 x 0.5 alumina 5.32 - 5.50 6.01 - 6.35 2.15 - 2.40
zirconia
M4 x 0.7 alumina 6.78 - 7.00 7.66 - 8.08 2.90 - 3.20
zirconia
M5 x 0.8 alumina 7.78 - 8.00 8.79 - 9.24 4.40 - 4.70
zirconia
M6 x 1.0 alumina 9.78 - 10.00 11.05 - 11.55 4.90 - 5.20
zirconia
M8 x 1.25 alumina 12.73 - 13.00 14.38 - 15.01 6.44 - 6.80
zirconia

Dimensions Per ANSI B18.2.4.1M-1979 (R1995)

Important Information -Please Read

Alumina & zirconia (PSZ) fasteners

  1. The pitch diameter of male threads will not exceed the max allowable according to Class 2. Minimum allowable pitch diameter may be below that of Class 2, conversely for female threads. Due to shrink factor variances, the stack up tolerance cannot be controlled on the pitch. It is recommended that you not engage more than 5 to 10 threads on any male fastener.
  2. No warranty with respect to torque strength and tensile strength is extended or implied. Ceramic materials are inherently brittle and display catastrophic failure if impacted or stressed beyond material limits.

Heat Resistant Corrosion Resistant Non-conductive Non Out-Gassing

Stock ceramic fasteners from Ceramco, Inc. Specializing in custom ceramic parts of complex geometries. Learn More.

Immediate Assistanceis only a phone call away. If you have any questions or require additional information, please call Ceramco at: +1 (603) 447-2090, Monday - Friday, 8:00 am - 4:30 pm, U.S. Eastern.