Solid Ceramic Fasteners


Socket Head Cone Point Set Screw Metric  |  U.S. Inch

Socket Head Cone Point Set Screw - MetricSocket head cone point metric set screws, as with all our ceramic fasteners, are molded from fine grain, self-bonded, polycrystalline ceramic oxides, which are non-conductive and exhibit zero porosity, making them ideally suited for leak-free vacuum environments.

To Order Set Screws:
  1. Find the correct Size
  2. Click-on the Composition you require
  3. Available lengths displayed on next page
Socket Head Cone Point Set Screw Metric dimensional reference

Available sizes, compositions and lengths vary and may be dependent upon material properties and performance characteristics.

Size Com­posi­tion
M3 x 0.5
M4 x 0.7
M5 x 0.8
M6 x 1.0
M8 x 1.25

Dimensions Per ANSI B18.3-1998

Material Properties Which is the best choice for your application?

Torque Values for applications dependent on specific torque or preload requirements.

Threads The pitch diameter of male threads will not exceed the max allowable according to Class 2. Minimum allowable pitch diameter may be below that of Class 2, conversely for female threads.

Due to shrink factor variances, the stack up tolerance cannot be controlled on the pitch. It is recommended that you not engage more than 5 threads on any male fastener.

Notice Ceramic materials are inherently brittle and display catastrophic failure if impacted or stressed beyond material limits.

Immediate Assistance is only a phone call away. Have questions or require additional information? Please call Ceramco at: +1 (603) 447-2090, Monday - Friday, 8:00 am - 4:30 pm, U.S. Eastern.

Same Day Shipping. Online orders received before noon U.S. Eastern Time (M-F) ship same day.