Solid Ceramic Fasteners

 ISO 9001:2015 • ITAR • CONTACT US

Technical Summary  |  Material Properties  |  Solutions  |  Manufacturing

Slotted Pan Head Machine Screws & BoltsU.S. Inch  |  Metric

stock ceramic pan head slotted fasteners - U.S. InchHomogeneous, 100% solid ceramic pan head slotted U.S. inch bolts and machine screws, as with all our ceramic fasteners, are ideally suited for highly corrosive environments, or where high temperatures or electrical discharge are a concern.

To Order Fasteners:
  1. Find the correct Size
  2. Click-on the Composition you require
  3. Available lengths displayed on next page
Pan head slotted U.S. Inch fastener dimensional reference

Available sizes, compositions and lengths vary and may be dependent upon material properties and performance characteristics.

    A B C D E
Size Com­posi­tion Head
Diam­eter		 Head
Height		 Head
Radius		 Slot
Width		 Slot
Depth
#0-80 alumina .104 - .116 .031 - .039 .020 Max .016 - .023 .014 - .022
ZTA
zirconia
#2-56 alumina .155 - .167 .045 - .053 .035 Max .023 - .031 .022 - .031
ZTA
zirconia
#4-40 alumina .205 - .219 .058 - .068 .042 Max .031 - .039 .030 - .040
ZTA
zirconia
#5-40 alumina .231 - .245 .065 - .075 .044 Max .035 - .043 .034 - .045
ZTA
zirconia
#6-32 alumina .256 - .270 .072 - .082 .046 Max .039 - .048 .037 - .050
ZTA
zirconia
#8-32 alumina .306 - .322 .085 - .096 .052 Max .045 - .054 .045 - .058
ZTA
zirconia
#10-24 alumina .357 - .373 .099 - .110 .061 Max .050 - .060 .053 - .068
ZTA
zirconia
#10-32 alumina .357 - .373 .099 - .110 .061 Max .050 - .060 .053 - .068
ZTA
zirconia
1/4"-20 alumina .473 - .492 .130 - .144 .087 Max .064 - .075 .070 - .087
ZTA
zirconia
1/4"-28 alumina .473 - .492 .130 - .144 .087 Max .064 - .075 .070 - .087
ZTA
zirconia
5/16"-18 alumina .594 - .615 .162 - .178 .099 Max .072 - .084 .085 - .106
ZTA
zirconia
3/8"- 16 alumina .716 - .740 .195 - .212 .143 Max .081 - .094 .100 - .124
ZTA
zirconia

Dimensions Per ANSI B18.6.3-1972 (R1991)

Material Properties Which is the best choice for your application?

Torque Values for applications dependent on specific torque or preload requirements.

Threads The pitch diameter of male threads will not exceed the max allowable according to Class 2. Minimum allowable pitch diameter may be below that of Class 2, conversely for female threads.

Due to shrink factor variances, the stack up tolerance cannot be controlled on the pitch. It is recommended that you not engage more than 5 threads on any male fastener.

Notice Ceramic materials are inherently brittle and display catastrophic failure if impacted or stressed beyond material limits.

Immediate Assistance is only a phone call away. Have questions or require additional information? Please call Ceramco at: +1 (603) 447-2090, Monday - Friday, 8:00 am - 4:30 pm, U.S. Eastern.

Same Day Shipping. Online orders received before noon U.S. Eastern Time (M-F) ship same day.